TECHNICAL SUPPORT AREA
Below are a CRS C4 and CRS C2 fitting instructions, including the bleed process.
RECOMMENDED TORQUE SETTINGS
Hydraulic brake sets are a safety critical product therefore we recommend that they are fitted and maintained by a qualified cycle mechanic.
Lever clamp bolt - 6-8NM
Rotor bolt - 6.2NM
Calliper to bracket bolt - 11-13NM
Bracket to frame bolt - 11-13NM
Calliper to frame (if no bracket required) - 11-13NM
Lever hose compression nut - 9NM
It is important that you test you brakes before each ride.